Mag Flame Failure Valve - Replacement Coil for the Cooker Side Mag Valve

Suitable for Rayburn Gas Nouvelle / Ranger / 365 / Rayburn GD80/380G.

This is the valve with the button, usually red, that is pushed IN to allow the gas to flow to the pilot jet on the cooker burner. The coil in the mag valve on the cooker burner side can fail. If your cooker fails to "hold" alight when you have got a pilot flame it's usually the thermocouple that has died. This is often when the engineer goes to relight the cooker after a service, or you want to relight after its been off for the summer. Most engineers change the thermocouple on servicing for that reason!

However if the thermocouple is OK the "mag valve", sometimes called the Flame failure valve, will have failed.

It's a pig of a job to change the whole thing but we have managed to source the internal "coil" that makes it work. Fitting is easy and your gas engineer inserts it through the thermocouple end after unscrewing the alloy nut.

The coil is an exact fit so its VITAL you check the size matches our stock as over 20 years Aga did make some different sizes!

Dimensions are length 44mm, width 15.5mm, seal end 11.5mm. If in doubt please contact us before ordering.