OUF88 Oil Lifter with 3.5l Internal Resevoir

If your oil tank is LOWER than the base of the cooker the oil will not flow to it! The minimum head, i.e. the verticle distance between the base of tank and the base of cooker, should be 18 inches or 450mm. Thus we can supply a lift pump that will draw the oil up and store it in a reservoir, before it descends down to your cooker by gravity.

The  rules insist that the lift pump be mounted externally. The amount of lift is usually up to 8 metres vertically.

This is the only way oil can be raised to the cooker, including those fitted with a Snugburner.

The OUF88 range of oil lifters should satisfy most domestic market requirements. They can be used to replace the no longer available BM346 lifter. Suction lift 8 litres @ 8 metres vertical & up to 25m horizontal pipe run on 10mm o/d pipe.

To satisfy strict regulations (to avoid oil pollution) we supply this lifter with drip tray and leak detector - the lifter should be fitted OUTSIDE as well.

If you are replacing any existing lifter of the same model we can also supply the bare lifter. Please select the relevant option below.